ChipWerke Piggyback Tuning Module for

RAM 1500 DT

2025+, 3.0L (Hurricane HO)

Stock 540 HP

Stage 1 +65 HP

Stage 2 up to 25% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

Modern trucks are built with efficiency in mind. This leaves untapped power, and the ChipWerke piggyback tuning module unlocks this hidden potential. It connects several engine sensors of the Hurricane HO engine and recalibrates the signals before they reach the ECU to increase turbo pressure. The increased boost results in a 65 HP gain with the Stage 1 tune. ChipWerke piggyback module installs in minutes with OEM plugs, leaves no flags on the ECU, does not cause CEL or limp mode, and is completely untraceable.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke increases power output by 65 HP with Stage 1, offering better power delivery throughout the entire RPM band, improving acceleration and towing performance.

Stage 2 Software for Supporting Mods

Contact us for a custom Stage 2 tune to use with other bolt-on performance upgrades such as intake, exhaust, intercooler, etc.

Completely Untraceable

ChipWerke works alongside the factory ECU and does not change any settings permanently. It leaves no traces or diagnostic codes, maintaining your warranty intact.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

A safe and reversible alternative to ECU reflashing, the ChipWerke piggyback module intercepts the signal from several sensors of your 3.0-liter Hurricane HO engine. It modifies the sensor readings to increase turbo boost pressure, significantly increasing horsepower and torque. You can adjust the boost levels with ChipWerke’s mobile app with seven preset levels (-3 to +3) to compensate for fuel quality or altitude.

The unit simply plugs in with high-quality OEM connectors; no cutting, wire splicing, or drilling is required. It does not permanently change any settings, leave footprints, or overwrite the original software. It is completely untraceable when removed for dealership work. ChipWerke does not cause limp mode or your Ram to throw the Check Engine Light.

EASY PLUG-AND-PLAY INSTALL

The module connects to two engine sensors of the Hurricane powerplant using OEM-quality plugs. It does not cause any permanent changes, and installation requires no wire cutting or splicing. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.