ChipWerke Piggyback Tuning Module for

Porsche Macan 95B

2014-2018, Macan Turbo 3.6L twin-turbo V6 (CTLA)

Stock 400 HP

Stage 1 +62 WHP

Stage 2 up to 30% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

Dyno Results

$349.99

$449.99

SAVE 22%

ADD TO CART

The ChipWerke piggyback tuning module is the best alternative to a permanent ECU tune for the Macan Turbo. It connects to the 3.6-liter twin-turbo V6 engine’s intake manifold pressure sensor and boost pressure sensor with OEM-quality plugs. ChipWerke modifies the signal readings with custom software to recalibrate and optimize the signal. It increases boost pressure, and ChipWerke’s Stage 1 tune delivers an extra 62 WHP (67 HP at the crank). Stage 2 tune is available for up to 30% gains in horsepower with supporting mods. ChipWerke does not overwrite the ECU or leave diagnostic flags. It comes with a two-year product warranty and extensive US-based customer support.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke’s Stage 1 tune increases the horsepower by 62 HP at the wheels. It increases the power and torque output of the twin-turbo 3.6-liter V6 engine throughout its whole RPM range.

Stage 2 Tune for Supporting Mods

Contact us for a custom Stage 2 tune for your Macan Turbo. With supporting upgrades and higher octane fuel, reliable gains of up to 30% over stock are possible.

Completely Untraceable

ChipWerke does not make changes to the stock ECU. It leaves no traces behind when removed, and it does not flag the ECU.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module intercepts the factory wiring harness of the Macan Turbo. It recalibrates the boost sensor and intake manifold sensor signals of the twin-turbo V6 engine. The best alternative to a permanent ECU remap, ChipWerke increases the boost pressure only by recalibrating sensor readings.

ChipWerke works alongside the factory ECU and makes no permanent changes, increasing the power while retaining OEM driveability and reliability. All the factory safety parameters stay intact. The ChipWerke’s tune can be adjusted with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the Macan Turbo’s intake manifold pressure sensor and boost pressure sensor. It connects with OEM-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.