ChipWerke Piggyback Tuning Module for

BMW M6 (incl. Coupe, Cabrio, and GranCoupe) F06 F12 F13

2012-2018, 4.4L twin-turbo V8 (S63B44)

Stock 560 HP

Stage 1 +67 WHP

Stage 2 up to 25% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

ADD TO CART

The ChipWerke piggyback tuning module connects to the S63 twin-turbo V8 engine’s intake manifold pressure sensor and boost sensor to intercept and recalibrate the signal flow. ChipWerke’s Stage 1 tune delivers an extra 67 HP at the wheels, and a custom Stage 2 tune is available. ChipWerke improves the power and torque output through the whole rev band. It is completely plug-and-play, and does not overwrite the ECU. ChipWerke does not alter the stock ECU and does not leave diagnostic flags. ChipWerke comes with a two-year product warranty and extensive US-based customer support.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke’s Stage 1 tune improves the horsepower by 67 HP at the wheels. It increases power and torque throughout the whole RPM band.

Stage 2 Tune for Supporting Mods

Contact us for a custom Stage 2 tune for your M6. With supporting upgrades and higher octane fuel, reliable gains of up to 25% over stock are possible.

Completely Untraceable

ChipWerke does not make changes to the stock ECU. It leaves no traces behind when removed, and it does not flag the ECU.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The best alternative to a permanent ECU tune, ChipWerke piggyback tuning module intercepts the factory wiring harness. It alters the readings from the boost sensor and intake manifold sensor of the S63 twin-turbo V8 of your M6. ChipWerke increases the boost pressure by recalibrating the sensor readings, increasing horsepower and torque.

ChipWerke works within your factory ECU and does not make any permanent changes, so it increases the power while retaining OEM driveability and reliability. All the factory safety parameters stay intact. The ChipWerke’s tune can be adjusted with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the BMW M6’s intake manifold pressure and boost pressure sensors. It intercepts the factory wiring harness with top-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.