ChipWerke Piggyback Tuning Module for

BMW M3 F80

2014-2018, 3.0L (S55B30)

Stock 425 HP

Stage 1 up to 70 HP

Stage 2 up to 100 HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

The ChipWerke piggyback tuning module is a plug-and-play tuning module for the BMW F80 M3 that connects to the two easy-to-reach sensors of the S55 3.0-liter engine. It works alongside the factory ECU without touching any of its built-in parameters to improve boost pressure. ChipWerke’s Stage 1 tune delivers an extra 70 HP, and a custom Stage 2 is available upon request for up to 100 extra horsepower. ChipWerke is completely untraceable when removed and does not cause any diagnostic or reliability issues.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Increase

ChipWerke’s Stage 1 delivers a healthy extra 70 HP. It unlocks faster acceleration and more linear power delivery across the whole RPM range.

Custom Stage 2 Available

Contact us for a custom Stage 2 software that delivers up to 100 HP increase. Perfect for using alongside supporting upgrades such as intake, exhaust, downpipe, bigger intercooler, etc.

Untraceable Performance Mod

ChipWerke does not make changes to the stock ECU. It leaves no traces or diagnostic flags on the factory DME, so it is untraceable when removed.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module connects to the factory wiring harness to alter the readings from the S55 engine’s 4-pin boost and 4-pin intake manifold pressure sensors. Unlike permanent ECU tunes, ChipWerke only intercepts and optimizes the stock signals to modify boost pressure. It increases horsepower and torque without making any extensive and permanent changes, keeping OEM reliability and driveability intact.

ChipWerke works within factory parameters, boosting power output while retaining OEM daily driveability and reliability. The ChipWerke’s tune can be adjusted with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the S55B30’s 4-pin boost pressure and intake manifold pressure (MAP) sensors underneath the engine bay cover. It intercepts the factory wiring harness with top-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.