ChipWerke Piggyback Tuning Module for

Audi TT 8S

2016-2018, 2.0 TFSI (CFYB)

Stock 292 HP

Stage 1 +58 HP

Stage 2 up to 30% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

ADD TO CART

ChipWerke piggyback tuning module for Audi TTS is the best alternative to a permanent ECU flash. It connects to the intake manifold pressure sensor and boost sensor with OEM plugs and recalibrates the stock signals to increase boost pressure. Increased boost translates to a 58 HP gain with the Stage 1 software, and up to 30% increase is possible with a custom Stage 2 tune and supporting mods. ChipWerke is completely untraceable and causes no diagnostic issues when it’s time for a service. ChipWerke improves power output throughout the whole RPM range and delivers better 0-60 times without compromising OEM drivability.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

More Power and Torque

ChipWerke’s Stage 1 tune increases power output by 58 HP. You get better 0-60 and increased power throughout the whole RPM range.

Stage 2 Tune with Supporting Mods

Custom Stage 2 software is available upon request. With supporting mods such as intake, exhaust, intercooler, downpipe, etc., up to a 30% increase in horsepower is possible.

Completely Untraceable

ChipWerke does not make changes to the stock ECU. It leaves no traces or diagnostic flags including the Audi/VAG TD1 code when removed.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module is the best alternative to a permanent ECU tune. It connects to the factory wiring harness to alter the readings from the 4-pin boost sensor and 4-pin intake manifold pressure sensor of the 2.0-liter TFSI engine. ChipWerke intercepts and optimizes the stock signals to modify boost pressure, increasing horsepower and torque.

ChipWerke works within factory parameters and does not permanently alter the stock ECU, so it boosts power output while retaining OEM daily driveability and reliability. The ChipWerke’s tune can be adjusted with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the 8S-generation Audi TTS’s intake manifold and boost pressure sensors. It intercepts the factory wiring harness with OEM-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.