ChipWerke Piggyback Tuning Module for

Mercedes-Benz E63 AMG S (W212/S212)

2012-2016, 5.5L twin-turbo V8 (M157DE55)

Stock 577 HP

Stage 1 +105 HP

Stage 2 up to 25% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

ADD TO CART

Unleash the real German beast under the hood! ChipWerke piggyback tuning module is the ultimate plug-in performance mod for the E63 AMG S. It increases the horsepower significantly without overwriting or interfering with the stock ECU. ChipWerke’s vehicle-specific Stage 1 tune delivers a whopping extra 105 HP over stock, and even more is possible with a custom Stage 2 tune to use with supporting mods. It is completely plug-and-play, and completely undetectable when removed, leaving no diagnostic flags or traces behind.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significantly More Horsepower

ChipWerke increases the power output of the E63 AMG S by over 100 HP with Stage 1. It delivers unmatched acceleration and power delivery throughout the whole RPM range.

Stage 2 Available Upon Request

A custom Stage 2 software is available upon request. With extra bolt-on upgrades, up to a 25% increase in power is possible.

Completely Untraceable Mod

ChipWerke does not make changes to the stock ECU. It leaves no traces or diagnostic flags because the stock ECU stays untouched.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module connects to the intake manifold and boost pressure sensors of the monster M157 5.5L twin-turbo engine in your Mercedes-Benz E63 AMG S. Unlike permanent ECU tunes, ChipWerke only intercepts and optimizes the sensor signals to modify boost pressure. It increases horsepower and torque without making any extensive and permanent changes, keeping OEM reliability and driveability intact.

ChipWerke works without overwriting the stock ECU, boosting power output while retaining OEM daily driveability and reliability. The ChipWerke’s tune can be adjusted with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the W212 E63 AMG S’s boost pressure and intake manifold sensors underneath the engine bay cover. It intercepts the factory wiring harness with OEM plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.