ChipWerke Piggyback Tuning Module for

Jeep Wagoneer & Wagoneer L WS

2023-2025, 3.0L (Hurricane SO)

Stock 420 HP

Stage 1 +80 HP

Stage 2 +100 HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

The ChipWerke piggyback tuning module unlocks power hidden by the factory. It recalibrates and optimizes the hurricane SO engine’s intake manifold pressure and boost pressure sensors to increase turbo pressure. ChipWerke’s Stage 1 tune adds up to 80 HP, and a custom Stage 2 software is available for up to 100 HP increase. Comes with a 2-yr product warranty and US-based customer support.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Increase

ChipWerke’s Stage 1 delivers up to 80 HP on the 3-liter Hurricane SO engine. Get faster acceleration and a linear power delivery across the whole RPM range.

Custom Stage 2 Upon Request

Contact us for a custom Stage 2 software for up to 100 horsepower gains.

Untraceable Performance Tuner

Installation is easy and does not require permanent changes. The module does not flag the ECU, so your factory warranty stays untouched.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

ChipWerke intercepts the factory engine harness to modify the stock signals from the intake manifold pressure and boost pressure sensors. It recalibrates the sensor readings with a vehicle-specific tune to remove factory restrictions and increase boost pressure. ChipWerke increases power without altering or flashing the ECU itself, making it the best possible alternative to a permanent ECU tune.

ChipWerke works without touching the ECU or making any permanent changes. This retains the OEM driveability, reliability, and factory safety parameters. You can adjust the ChipWerke module’s performance tune with seven preset levels via the mobile app to precisely dial in power delivery for your driving style, altitude changes, or varying fuel quality.

EASY PLUG-AND-PLAY INSTALL

The module connects to the intake manifold pressure and boost pressure sensors of the Hurricane SO powerplant using OEM-quality plugs. It does not cause any permanent changes, and installation requires no wire cutting or splicing. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.