ChipWerke Piggyback Tuning Module for

Dodge Charger 8th Gen

2026+, 3.0L (Hurricane HO)

Stock 550 HP

Stage 1 +65 HP

Stage 2 up to 25% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

Modern vehicles are engineered to meet efficiency targets, even if they are muscle cars. The LB-generation Dodge Charger is no different, and this engineering leaves untapped power on the table. The ChipWerke piggyback module unlocks this hidden power of the 3-liter Hurricane HO engine. It connects two engine sensors and recalibrates the factory signals before they reach the ECU. This increases boost pressure, delivering an extra 65 HP over stock in Stage 1, and a custom Stage 2 tune is available upon request. ChipWerke piggyback module installs in minutes with OEM plugs, leaves no flags on the ECU, does not cause CEL or limp mode, and is completely untraceable.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Boost

ChipWerke increases power output by 65 HP with Stage 1, improving acceleration and offering better power delivery throughout the entire RPM band.

Stage 2 Software for Supporting Mods

Contact us for a custom Stage 2 tune to use with other bolt-on performance upgrades such as intake, exhaust, intercooler, etc.

Completely Untraceable

ChipWerke works alongside the factory ECU and does not change any settings permanently. It leaves no traces or diagnostic codes, maintaining your warranty intact.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

ChipWerke intercepts the factory engine harness to modify the stock signals from several engine sensors on the 3-liter Hurricane HO engine. It recalibrates the factory signal with vehicle-specific software to remove factory restrictions and increase boost pressure. ChipWerke delivers instant performance gains without altering the ECU itself, making it the best possible alternative to a permanent ECU reflash.

ChipWerke works alongside the factory ECU software, making no permanent changes. This retains the OEM driveability, reliability, and factory safety parameters. You can adjust the ChipWerke module’s performance tune with seven preset levels via the mobile app to precisely dial in power delivery for your driving style, altitude changes, or varying fuel quality.

EASY PLUG-AND-PLAY INSTALL

The module connects to two engine sensors of the Hurricane HO powerplant using OEM-quality plugs. It does not cause any permanent changes, and installation requires no wire cutting or splicing. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.