ChipWerke Piggyback Tuning Module for

Audi S3 8V

2019-2020, 2.0 TFSI (CYFB)

Stock 288 HP

Stage 1 +50 HP

Stage 2 up to 35% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

The ChipWerke piggyback tuning module is the best alternative to permanent ECU tuning. It is the best plug-in performance upgrade for the Audi S3 8V—ChipWerke intercepts the boost pressure sensor and recalibrates the reading for an increased turbo pressure. ChipWerke delivers an extra 50 HP with Stage 1 tune and up to 35% with Stage 2. ChipWerke unlocks better 0-60 times without causing diagnostic flags, including the Audi/VAG TD1 code. Completely untraceable, reliability and warranty-friendly, and super easy to install, the ChipWerke piggyback tuning module is the ultimate performance mod for the Audi S3.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke increases power output by 50 HP with Stage 1 and up to 35% with Stage 2, delivering faster acceleration and better power delivery throughout the entire RPM band.

Stage 2 Tune for Supporting Mods

Custom Stage 2 software delivers up to 35% increase in power with supporting bolt-on mods like intake, exhaust, downpipe, etc.

Completely Untraceable

ChipWerke leaves the factory ECU untouched, leaves no diagnostic flags, or causes the VAG/Audi TD1 code.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module connects to the turbo boost pressure sensor of your EA888 Gen 3 engine. ChipWerke only intercepts and optimizes the stock signals to modify boost pressure, increasing horsepower and torque, without making permanent changes to the stock ECU settings.

It works within factory parameters and does not permanently alter the stock ECU, so ChipWerke boosts power output while retaining OEM reliability. The mapping can be fine-tuned with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or climate conditions.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the 4-pin boost pressure sensor located at the front of the EA888 engine. It intercepts the factory wiring harness with top-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

View Installation Guide