- CHIPWERKE STAGES FOR
AUDI TT 2.0 TFSI
(8J, EA888, 2009-2013)
The ChipWerke piggyback chip tuning box intercepts the Audi TT 2.0 TFSI’s boost pressure and intake manifold pressure sensors to optimize the settings to significantly increase horsepower and torque. ChipWerke’s Stage 1 mapping transforms the 8J TT with 39 HP power and a 62 lb-ft torque gain. You can get even more (up to 35%) with a custom Stage 2 mapping.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
With forced induction and especially turbocharging, manufacturers now make software-based changes to their engines to offer different power levels. VAG’s EA888 engine family is a perfect example of taking advantage of forced induction to offer varying power levels for different cars and even trim levels. The 2.0L turbocharged EA888’s output varies from as low as 180 HP up to over 300 HP in various VAG vehicles.
Optimizing a turbocharged engine’s factory-restricted settings reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.
With forced induction and especially turbocharging, manufacturers now make software-based changes to their engines to offer different power levels. VAG’s EA888 engine family is a perfect example of taking advantage of forced induction to offer varying power levels for different cars and even trim levels. The 2.0L turbocharged EA888’s output varies from as low as 180 HP up to over 300 HP in various VAG vehicles.
Optimizing a turbocharged engine’s factory-restricted settings reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.
Engineered specifically for the 2.0L EA888 engine, ChipWerke intercepts the intake manifold pressure and boost pressure readings to optimize the settings for increased power. It works within the engine’s capacity, so ChipWerke does not harm or strain the components.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
Engineered specifically for the 2.0L EA888 engine, ChipWerke intercepts the intake manifold pressure and boost pressure readings to optimize the settings for increased power. It works within the engine’s capacity, so ChipWerke does not harm or strain the components.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning kit is engineered and tuned specifically for the EA888 engine. It is not a generic or universal box.
VARIOUS POWER SETTINGS
You can optimize ChipWerke's map with seven preset levels, depending on your driving style, climate, or fuel quality.
BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, this can result in up to a 15% MPG increase.
PLUG-AND-PLAY UPGRADE
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed, and it comes packaged with all the necessary attachments.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.
TOTAL PEACE OF MIND
ChipWerke does not flag the Engine Control Unit (ECU), overwrites any stock settings, and cannot damage your engine. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke connects to your AUDI TT 2.0 TFSI (8J)’s intake manifold pressure and boost sensors. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View DetailChipWerke connects to your AUDI TT 2.0 TFSI (8J)’s intake manifold pressure and boost sensors. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details