- CHIPWERKE STAGES FOR
AUDI S5 B9
(EA839 / CWGD, 2017-2024)
ChipWerke piggyback chip tuning is the perfect solution for plug-and-play power increase. It connects to several sensors to intercept the signal and remove factory restrictions to make more turbo boost. It significantly increases the power output without extensive modifications. Enjoy over an extra 60 HP in your Audi S5 8P with ChipWerke!
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
The CWGD engine in the S5 B9 Coupe and Sportback is a member of the EA839 turbocharged V6 engine series. The EA839 engine family utilizes different software to power A6s, A8s, and even RS4s. With forced induction prevalent to reduce emissions and increase efficiency, manufacturers now offer varying power levels from a single engine with only software-based changes.
Optimizing a turbocharged engine’s factory-restricted settings reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.
The CWGD engine in the S5 B9 Coupe and Sportback is a member of the EA839 turbocharged V6 engine series. The EA839 engine family utilizes different software to power A6s, A8s, and even RS4s. With forced induction prevalent to reduce emissions and increase efficiency, manufacturers now offer varying power levels from a single engine with only software-based changes.
Optimizing a turbocharged engine’s factory-restricted settings reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.
Engineered specifically for the 3.0L V6 TFSI engine, ChipWerke intercepts the signal from the intake manifold pressure sensors to optimize and modify the settings for increased turbo pressure. This results in a significant hike in power and torque. The module does not harm or strain the engine components and does not make any permanent changes.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
Engineered specifically for the 3.0L V6 TFSI engine, ChipWerke intercepts the signal from the intake manifold pressure sensors to optimize and modify the settings for increased turbo pressure. This results in a significant hike in power and torque. The module does not harm or strain the engine components and does not make any permanent changes.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning kit is engineered and tuned specifically for the S5 Coupe or Sportback’s CWGD V6 turbo engine. It is not a generic or universal box.
FULL ADJUSTABILITY
You can optimize ChipWerke's map with seven preset levels, depending on your driving style, climate, or fuel quality.
BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, this can result in up to a 15% MPG increase.
EASY TO INSTALL
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed, it is completely plug-and-play, and it comes packaged with all the necessary attachments.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.
TOTAL PEACE OF MIND
ChipWerke does not flag the Engine Control Unit (ECU), overwrites any stock settings, and cannot damage your engine. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke connects to your Audi S4 B9’s intake manifold pressure sensors at each side of the engine block. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail
ChipWerke connects to your Audi S4 B9’s intake manifold pressure sensors at each side of the engine block. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Audi S5 - B9 ( 2017 - 2024 ) - 3.0L TFSI V6 - 349hp - EA839
STOCK
170 HP
from the factory with its 2-liter inline-4. While this power unit offers a good performance combined with Audi's optional Quattro all-wheel drive system, you can get much more out of it.
STAGE 1
190 HP
Increase
Difference
STAGE 2
300 HP
Increase
Difference