Engineered for turbocharged vehicles, the ChipWerke piggyback chip tuning box modifies the restrictive stock settings. The ChipWerke module reads the data flow and alters the readings to optimize and improve boost pressure. It works within the engine’s capacity and does not harm or strain components for extreme outputs. The unit is installed with the OEM plugs provided in the box. The installation process is simple and DIY-friendly.
WHAT IS PIGGYBACK CHIP TUNING?
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Again, thanks to turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
HOW DOES CHIPWERKE PIGGYBACK CHIP TUNING WORK?
-
15-35% Increase in Power and Torque
-
OEM-Style Harness and Quality Connectors
-
Two-Year Warranty and USA-based after-sales
ChipWerke comes with mapping specifically engineered for the application. You can adjust the aggressiveness of the mapping with ChipWerke’s seven preset levels (-3 to +3) to dial in the power output according to your driving style, fuel quality, or climate conditions. You can also control the module wirelessly from your mobile phone via Bluetooth.
BEST FEATURES OF CHIPWERKE PIGGYBACK TUNING BOX
UP TO 35% INCREASE IN POWER
ChipWerke’s vehicle-specific mapping increases the power and torque output by up to 35%, depending on the vehicle, tuning stage, and application.
VARIOUS POWER SETTINGS
Depending on your driving style, climate conditions, or fuel quality, you can optimize ChipWerke’s map by adjusting the aggressiveness from -3 to +3.
INCREASED FUEL EFFICIENCY
The increased low-end and midrange torque will result in up to a 15% MPG increase when combined with fuel-efficient driving habits.
PLUG-AND-PLAY UPGRADE
ChipWerke is entirely plug-and-play. The installation process is easy and DIY-friendly, and everything is supplied in the box.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.
TOTAL PEACE OF MIND
ChipWerke does not flag or overwrite the Engine Control Unit (ECU), so the factory reliability stays intact. It also comes with two years of coverage and extensive USA-based after-sales support for total peace of mind.
EASY AND PLUG-AND-PLAY INSTALLATION PROCESS
ChipWerke connects to one or more engine data sensors with OEM-style, quality connectors. No drilling, wire splicing, or cutting is required. The guide included in the package shows specific installation instructions for your vehicle.
INSTALLATION GUIDEThe basic things to consider in all applications are as follows:
1 -
Engine Off & ECU Reset
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
2 -
Mounting Location
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
3 -
Harness Protection
Make sure the ChipWerke harness is not overly stretched and is protected against water.
4 -
Secure Connections
Make sure that plugs are securely connected in place and that there are no unused plugs left.