- CHIPWERKE PIGGYBACK TUNING MODULE FOR
AUDI RS7
(4G, EA824 4.0L TFSI, 2014-2018)
ChipWerke is the only piggyback tuning solution you need. It intercepts the data from the boost pressure sensors and removes factory limitations for a huge boost in power and torque. ChipWerke installs in minutes using OEM plugs, so no permanent changes or wire cutting is required. Get the ChipWerke piggyback tuning module for a healthy and significant power gain.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.Fuel economy highly depends on driving habits.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
With the prevalence of turbocharging for more efficiency, vehicle manufacturers now make software-based changes to their engines to offer different power outputs. The EA824 4.0-liter TFSI V8 engine is an example, as it is used in different Audi, Porsche, and Bentley models with varying outputs. The same engine is offered with different software for different applications.

Piggyback chip tuning boxes optimize the factory settings by intercepting and modifying the stock signal flow to reveal more power and torque. Piggyback tuning kits do not make permanent changes to the factory engine control unit (ECU), are generally plug-and-play, and do not require extensive modifications.
With the prevalence of turbocharging for more efficiency, vehicle manufacturers now make software-based changes to their engines to offer different power outputs. The EA824 4.0-liter TFSI V8 engine is an example, as it is used in different Audi, Porsche, and Bentley models with varying outputs. The same engine is offered with different software for different applications.
Piggyback chip tuning boxes optimize the factory settings by intercepting and modifying the stock signal flow to reveal more power and torque. Piggyback tuning kits do not make permanent changes to the factory engine control unit (ECU), are generally plug-and-play, and do not require extensive modifications.

Engineered for turbocharged engines, ChipWerke is a piggyback chip tuning solution that offers significant horsepower and torque gains. ChipWerke connects to the EA824’s boost pressure sensors to intercept the signal flow. It then optimizes the data to remove the factory restrictions and allows the engine to produce much more power and torque compared to stock by increasing boost pressure. The module does not harm or strain the engine components and does not make any permanent changes.
ChipWerke comes with mapping specifically engineered for the 4.0L TFSI V8, and the Stage 1 map reliably increases the power by over 90 HP. ChipWerke’s seven preset levels (-3 to +3) allow for precise adjustments so you can dial in the power output to your driving needs or compensate for varying climate conditions and fuel quality. Also, ChipWerke’s free mobile app allows you to control the unit wirelessly via Bluetooth from your phone.
Engineered for turbocharged engines, ChipWerke is a piggyback chip tuning solution that offers significant horsepower and torque gains. ChipWerke connects to the EA824’s boost pressure sensors to intercept the signal flow. It then optimizes the data to remove the factory restrictions and allows the engine to produce much more power and torque compared to stock by increasing boost pressure. The module does not harm or strain the engine components and does not make any permanent changes.
ChipWerke comes with mapping specifically engineered for the 4.0L TFSI V8, and the Stage 1 map reliably increases the power by over 90 HP. ChipWerke’s seven preset levels (-3 to +3) allow for precise adjustments so you can dial in the power output to your driving needs or compensate for varying climate conditions and fuel quality. Also, ChipWerke’s free mobile app allows you to control the unit wirelessly via Bluetooth from your phone.

VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning kit is engineered and tuned specifically for the S6’s V8 turbo engine. It is not a generic or universal box.

FULL ADJUSTABILITY
You can optimize ChipWerke's map with seven preset levels, depending on your driving style, climate, or fuel quality.

BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, this can result in up to a 15% MPG increase.

EASY TO INSTALL
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed, it is completely plug-and-play, and it comes packaged with all the necessary attachments.

WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.

TOTAL PEACE OF MIND
ChipWerke does not flag the Engine Control Unit (ECU), and overwrites any stock settings. It is untraceable when removed. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke’s wiring harness has quality connectors, so no splicing, drilling, or cutting is needed. It connects to the 4.0 TFSI’s boost pressure sensors with OEM plugs. The included instruction guide shows the specific connection locations for your Audi RS7. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail



ChipWerke’s wiring harness has quality connectors, so no splicing, drilling, or cutting is needed. It connects to the 4.0 TFSI’s boost pressure sensors with OEM plugs. The included instruction guide shows the specific connection locations for your Audi RS7. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Audi RS7 - 4G ( 2014 - 2018 ) - 4.0 TFSI - 560hp - EA824





