- CHIPWERKE PIGGYBACK TUNING MODULE FOR
AUDI Q5 3.0T
(8R, EA837, 2012-2016)
ChipWerke is the best plug-and-play tuning solution. It modifies stock signal flow between several data sensors to optimize boost pressure for a significant power and torque increase. ChipWerke piggyback module runs a custom software specifically engineered for the supercharged 3.0 TFSI V6 engine in the Q5 3.0T. It is not detectable, leaves no trace, and does not change ECU settings.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.Fuel economy highly depends on driving habits.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
The 3.0-liter supercharged V6 in the Audi Q5 3.0T is a member of the EA837 VAG engine family, and it has different outputs for different applications due to different software. This is a perfect example of a manufacturer making only software-based changes to offer varying power outputs from the same engine.

Thanks to turbocharging and supercharging, optimizing the factory-restricted boost pressure reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.
The 3.0-liter supercharged V6 in the Audi Q5 3.0T is a member of the EA837 VAG engine family, and it has different outputs for different applications due to different software. This is a perfect example of a manufacturer making only software-based changes to offer varying power outputs from the same engine.
Thanks to turbocharging and supercharging, optimizing the factory-restricted boost pressure reveals increased power and torque. A piggyback chip tuning box intercepts the stock signal flow between several sensors and adjusts the data to modify the conservative factory settings for gains in power output.

ChipWerke runs software engineered specifically for the supercharged 3.0L V6 TFSI engine. This software optimizes the stock signal flow to increase the boost pressure, resulting in a significant hike in power and torque. ChipWerke intercepts the signal from the intake manifold sensors to optimize and modify the factory settings.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
ChipWerke runs software engineered specifically for the supercharged 3.0L V6 TFSI engine. This software optimizes the stock signal flow to increase the boost pressure, resulting in a significant hike in power and torque. ChipWerke intercepts the signal from the intake manifold sensors to optimize and modify the factory settings.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.

VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning kit is engineered and tuned specifically for the Q5 3.0T’s supercharged V6 unit. It is not a generic or universal box.

FULL ADJUSTABILITY
You can optimize ChipWerke's map with seven preset levels, depending on your driving style, climate, or fuel quality.

BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, this can result in up to a 15% MPG increase.

EASY TO INSTALL
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed, it is completely plug-and-play, and it comes packaged with all the necessary attachments.

WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.

TOTAL PEACE OF MIND
ChipWerke does not bypass factory security parameters and does not manipulate OEM ECU codes so it cannot damage your engine. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke connects to your Audi Q5 3.0T’s intake manifold pressure sensors at each side of the engine block. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail



ChipWerke connects to your Audi Q5 3.0T’s intake manifold pressure sensors at each side of the engine block. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Audi Q5 - 8R 3.0T ( 2012 - 2016 ) - 3.0 TFSI - 272HP - EA837





