Does ChipWerke Void My Warranty?
ChipWerke is a next generation stealth plug-in performance solution which if the chipwerke removes before service cannot be detected by car dealers .Because it will not overwrite your vehicle’s original software and it does not leave footprint after removal.
Does ChipWerke harm my engine?
No, ChipWerke is tuned to work with your engine, providing you with access to its originally engineered potential, before the manufacturer imposed performance limitations on it for general public appeal.
What is the lowest and highest mileage I can use with ChipWerke?
Your car’s milage does not affect ChipWerke’s ability to deliver greater engine performance. You can use ChipWerke at any milage. As long as the vehicle and engine are well maintained, our digital technology is unaffected.
Can I use my old ChipWerke unit in a new vehicle?
Yes, if your new vehicle has the same injection system as your previous vehicle, you can simply transfer your unit over. If there are significant diferences between your vehicles, however, you may need a new cable harness or software update. You can purchase a cable harness from us, and we can also reprogram your ChipWerke unit for your new vehicle; both only cost you a small fee. For more detailed compatability information, please contact us: email@example.com
Is ChipWerke detectable by manufacturer and dealer service garages?
No. ChipWerke is not detectable. After the removal of ChipWerke, the vehicle is returned to its original manufacturer’s settings. No hardware or software changes are made in the vehicle, and ChipWerke does not leave a trace footprint, protecting your warranty.
How can I save fuel with ChipWerke? How does it work?
Customers reported a reduction of consumption of up to 15% more MPG. Due to the significantly increased torque in the lower RPM range, it’s possible to upshift to the next gear early, which reduces fuel consumption. Fuel economy also depends greatly on your driving behavior and the motor characteristics of the vehicle.
What tools do I needs to install my ChipWerke performance chip?
You do not need any special tools to install your unit. The unit ships to you with the necessary attachments for installation in the engine compartment
Where should I secure my ChipWerke unit in my engine compartment?
Once installed, your ChipWerke should be secured somewhere that it won’t interfere with any of your cars moving parts,Chipwerke harness should not be a tie with Fuel injector harness or ABS harness(they carry high-frequency signal) won’t be subjected to intense or damaging heat, and will stay dry.
Will the ChipWerke chip cause my car to fail emissions testing or negatively affect my emissions?
No, ChipWerke will not affect your emissions or cause you to fail any emissions testing, even in areas with very high emissions standards.
How can I modify the performance on ChipWerke
We deliver ChipWerke with a basic setting appropriate for your vehicle. With this basic setting, you achieve a power improvement of approximately 18-35%. This is the perfect compromise between fuel saving and power improvement. There is no fixed setting value for the maximum setting as the power input can vary from vehicle to vehicle although the engines are the same. Refer to the installation manual for fine tuning. For further request, please contact us.
Why does my vehicle computer show error messages (CEL) & why does my vehicle switch to the emergency program (limp mode)?```}`
Due to manufacturer-determined serial tolerances, the power output of ChipWerke might be too high. However, you can easily correct it yourself by adjusting the rotary control switch in just a few steps.
More Questions? Ask us!
Please do not hesitate to contact us. Our technical and sales department will answer all your questions? Contact Us